floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
     

How to Build a Shed Floor

Step 4: Square the Frame.

Place a 2"x6" support board on top of each row of Dek-Block® piers. Next, attach 2"x6" end boards to support boards using two 2 1/2" deck screws at each connection. Using a level as a guide, ensure that both end boards and both support boards are level.

Measure the diagonal distance from opposite corners. Adjust the outside support boards and Dek-Block® piers until the diagonal distance between opposite corners is EQUAL.

After the deck is square and level in all four directions, attach the 2"x6" support boards to the 4"x4" posts using two 2 1/2" deck screws at an angle from each side (toe-screw).
 

Toe-Screwing Supports
 

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

next  

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

   next
Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.