How to build the Deluxe Pool Deck

Step 9: Complete interior framing.

Locate and position the interior row of Dek-Block® piers according to the dimensions on the plan. Using similar methods from previous steps, cut the 4"x4" post to length for the center Dek-Block® pier. Located on the plan, one of the supports will be labeled with a dimension. Cut one end of the support board at a 45 degree angle. Then, position and secure it to the outside angled board, so it rests on the center post.

The second support board will need to be cut-to-fit. Place a 2"x6" support board in location (one end of the board centered on the 4"x4" post and the other end extending over the angled outside board). Using a pencil, scribe the angle and length of the support board. Next, cut the support board to fit and secure in place at both ends. Cut the remaining 4"x4" posts to length, and secure them to the 2"x6" support boards.

Printable Step by Step Instructions: Deluxe Deck

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10
11 - 12 - 13 - 14 - 15 - 16 - 17