How to build the Deluxe Pool Deck

Step 17: Secure spindles

On the 2"x6" board, find the center and mark a line every 5 inches from this point. Center and attach the 2"x2" spindle to the 2"x6" rail board at every mark, using only one 2 1/2" deck screw at the top. With a level, plumb (vertically level) each 2"x2" spindle and attach a 2 1/2" deck screw into the deck frame. After 2"x2" spindles are positioned, attach a second 2 1/2" deck screw at the top and bottom of each spindle. Typical building code requires a space no greater than 4" between spindle openings.

Tip 1: Verify that all 2"x2" spindles are exactly the same length. It is common for spindles to be slightly different lengths. If they are different lengths, a jig can be used to quickly cut all 2"x2" spindles to the same length.

Tip 2: Pre-drilling 2"x2" spindles will help reduce splitting of the lumber. Determine the locations for the deck screws and pre-drill two holes at both ends using a counter-sink bit. All 4 deck screws can be "started" before attaching to the railing and frame.

Printable Step by Step Instructions: Deluxe Deck

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10
11 - 12 - 13 - 14 - 15 - 16 - 17