NEW

How to Build a Box Step

Step 2: Position Patio Stones

Dig a shallow hole to the width of the step. The hole should be approximately 4-6 inches deep. Place a 2 - 4 inch base of sand or crushed rock into the hole. Wet, compact and level the material. Next, position the concrete patio stones on the sand base. Ensure the patio stones are level in both directions, and level with each other. Use the remaining sand to make any adjustments. The patio stones should be positioned every 16" - 24" on center.

24" for 2"x6" surface boards and 16" for 5/4"x6" or composite surface boards.

Page:
1 - 2 - 3 - 4

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format. You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.