floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
     

How to Build a Staircase

Continued Step 6: Cut the first stair stringer
 

From this mark, draw a line that is perpendicular to the top run. Extend the line to the back edge of the 2"x12" board.
 
 

Next, draw a notch that is 1 1/2" by 3 1/2". This will be used to attach a 2"x4" board.
 
 

Now, all of the drawing on the board should be complete. Use a circular to cut out the stair stringer. Only cut up to the end of the line, not past it. Due to the curve of the circular saw blade, some material will remain in the corners. Use either a hand saw or a jig saw to remove the remaining material.
 
 
 
 
 
 

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

next  

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

  next
Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.