floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
 

Step 9 - Add Fascia Blocking

Cut and attach 6" - 2"x6" support blocking between the outside 2"x6" frame and the 2"x6" support board. (Image 9) Attach using two 2 1/2" galvanized deck screws at each end. (Image 10)

Step 10 - Layout and Secure Decking

Starting at one end and align the first decking board with the edge of the 2"x6" end board. The decking should run perpendicular to the 2"x6" support boards. (Image 11) For this project, we used CorrectDeck composite lumber. Due to the density and consistency of composite lumber, we used 2 1/2" Zip-Tip trim head screws. These are designed specifically for composite decking. Before attaching with screws, we recommended that the composite decking be pre-drilled. When the torx-drive screw head (about 3/16" wide) is driven below the surface, the fibers in the decking around the hole and the screw head virtually disappears. Use the width of a deck screw as a spacer between the deck boards. (Image 12)

Step 11 - Final Decking Boards

As the decking becomes close to the end, measure each side to ensure the decking is parallel with the 2"x6" end board. Small corrections may be needed on the remaining boards to ensure they are parallel. (Image 13)

Step 12 - Finish Decking
Using a sharp carbide-tip blade, trim the overhanging decking boards flush with the edges of the 2"x6" support frames. (Image 14)
 
Image 9
 
Image 10
 
Image 11
 
Image 12
 
Image 13
 
Image 14

Printable Step by Step Instructions & Plans

  


The printable version of our instructions are in Adobe PDF format. You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.