floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
 

Step 24 - Corner Leg Support

Place a 19" cedar 2"x4" board in the four 45 degree corners of the bench. Toe-screw into the surface of the deck and into the frame of the bench using 2 1/2" trim head screws. (Image 30)

Step 25 - Corner Frame Support

Measure and cut a double 2"x4" cedar board to be placed in the four 45 degree corners. Secure to each other, and then to the frame of the bench using 2 1/2" trim head screws. (Image 31)

Step 26 - Bench Based Trim
Cut 18 22" cedar 2"x4" boards. Cut a 1 1/2" - 45 degree chamfer from each end. Position one board on each side of each leg and attach using 2 1/2" trim head screws. (Image 32)

Step 27 - Bench Decking
Cut to fit four decking boards for each section of the bench. Start at one end of the bench and work your way around. Use the width of a deck screw as a spacer between deck boards. (Image 33) Attaching using 2 1/2" trim head screws. Predrilling is preferred.
 
Image 30
 
Image 31
 
Image 32
 
Image 33

Printable Step by Step Instructions & Plans

  


The printable version of our instructions are in Adobe PDF format. You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.